The IVG 2400 works differently from single-use disposables. Its four-pod carousel system gives you up to four flavours in one device and up to 2,400 total puffs. This guide covers setup, switching flavours, charging and best practices.

What's in the Box

• IVG 2400 battery unit with built-in 4-pod carousel
• 4 prefilled flavour pods (already loaded into the carousel)
• USB-C charging cable
• Quick start guide

Getting Started: Step by Step

1. Remove from packaging: the device comes with pods pre-loaded in the carousel. A silicone seal on the mouthpiece protects the pod during shipping; remove this before use.
2. Check battery level: the LED at the base indicates battery status. If it flashes rapidly, charge the device before first use. A new device should have a partial charge out of the box.
3. Select your starting flavour: look at the top of the device; the active pod (the one currently inserted in the draw position) is the one you will vape first. Each pod is labelled with its flavour.
4. Prime the coil (first use): take 3 to 5 gentle, short puffs without inhaling to let the wick saturate. This primes the coil and prevents a dry first hit.
5. Inhale to vape: the IVG 2400 is draw-activated. Place the mouthpiece to your lips and inhale steadily. There is no button to press.

Switching Between Flavours

1. Pull the current active pod straight upward out of the device. It will come out with a firm tug.
2. Rotate the carousel so the next desired flavour pod is in the top (active) position.
3. Push the new pod firmly down into the active position until it clicks into place.
4. Take a couple of short primer puffs before inhaling deeply, especially if the pod is new.

Each pod retains its own liquid level independently when removed. You can switch between pods freely without losing any of the remaining liquid in the pod you set aside.

Frequently Asked Questions